Rain Barrel Diverter Kit
Diverter system installs into your 2x3 or 3x4 inch downspout and allows a portion of the rain water traveling down your downspout to be redirected into your barrel. When the barrel is full, the rain water continues down the downspout. This method eliminates the need for overflow hoses and leaves your downspout intact.
- Diverter downspout insert
- Flexible hose to attach to barrel
- Drill bit to create hole in gutter
*Kit is not guaranteed to include the winter whole cover (just unscrew the flex fit insert screws and rotate the cup 180 degrees for the winter season.)
*Skip step 5 in the "Earthminded" installation instructions. You do NOT need to drill any additional holes in your barrel. The flexible hose will screw directly onto the top threaded connector on the barrel.
You will need:
Electric or battery powered drill
For use with our re-purposed 55 gallon barrels.
Rain Barrel Pedestal Stand
Elevate your rain barrel to allow easy watering can access under the spigot and increased water pressure. Each pedestal is made from re-purposed "upcycled" lumber.
55 Gallon Rain Barrel
Re-purposed food grade barrels. They have a spigot on the bottom and a threaded overflow/diverter attachment hole at the top. The top of the barrel will have holes (for receiving water) covered by a screen. Returns are not accepted after barrel pick up.
Carmel resident? Learn more about rebate (rebate after purchase and install) here: www.rainonmain.com/carmel-rain-barrel-subsidy